Overheated transformer bushing

This transformer experienced a problem internally, which manifested itself as an overheated bushing. Within 24 hours, the transformer was removed from service and the back-up unit was installed. This averted the potential spoilage of several millions of dollars worth of agricultural products.

Motor bearing lacks lubricant

The bearing on the driving end of this motor was found to be reading 187 degrees F -- more than 60 degrees F above ambient. The motor was examined and it was discovered that the lubrication was insufficient. Lubrication was restored, thus preventing the eventual failure of the motor.

A properly operating steam trap

This image shows a steam trap which is operating properly. Faulty steam traps waste energy and cost a plant money. Infrared is an invaluable tool for readily detecting faulty traps so they can be repaired.